2027 Jeep Grand Wagoneer Maintenance Schedule
Engine, Mileage and Time Requirements for Scheduled Service
Proudly serving Brevard, Asheville, Hendersonville, Fletcher & Cherokee NC

2027 Jeep Grand Wagoneer Scheduled Maintenance Overview
Plan your 2027 Jeep Grand Wagoneer service around the engine, mileage, elapsed time and way you drive. The schedule below draws from the manufacturer-authored owner’s manual and keeps normal, severe-use and equipment-specific work identified. The manual’s 3.0L Standard Output plan uses 12,000-mile cabin filters, 30,000-mile engine air filters and 60,000/120,000-mile spark plugs. At oil service, inspect the usual engine, brake and chassis items and clean/lubricate equipped power-side-step linkages. Our service team in Brevard can review your records, identify the applicable engine and help plan the next visit before a warning or worn component becomes a larger problem.
Oil-service guidance: Oil-change message; maximum 10,000 miles / 12 months; indicator also monitors 350 engine hours. Follow an earlier oil-change message and use the mileage, time or engine-hour limit reached first. A maintenance-grid column is not permission to extend an oil change past its maximum. Tell your advisor about towing, short trips, dust, idling and temperature extremes. Rotate tires at the first sign of irregular wear, following the rotation pattern allowed by the installed tires and wheels.
Oil & Filter
Oil-change message; maximum 10,000 miles / 12 months; indicator also monitors 350 engine hours
Cabin Air Filter
Every 12,000 miles
Confirm replacement part by VIN
Spark Plugs
3.0L: 60,000 and 120,000 miles
Service Timing
Use mileage and elapsed time
Match the engine and operating conditions
Complete Maintenance Schedule by Mileage
| Interval | Service | Applies To |
|---|---|---|
| Brake fluid / automatic transmission fluid | No scheduled brake fluid (DOT 3) or automatic transmission fluid replacement in the owner's manual; axle fluid change only under severe service | 3.0L Hurricane Standard Output |
| Every 10,000 miles (Oil Change Indicator; never exceed 10,000 mi / 12 months / 350 engine hours) | Change engine oil and filter; rotate tires; inspect 12V battery terminals; inspect CV/universal joints; inspect brake pads, shoes, rotors, drums, hoses and parking brake; inspect engine cooling system and hoses; inspect exhaust system; inspect engine air filter if dusty/off-road | 3.0L Hurricane Standard Output |
| Every 12,000 miles | Replace cabin air filter | 3.0L Hurricane Standard Output |
| Every 20,000 miles | Inspect front suspension and tie rod ends (replace if necessary); inspect front and rear axle fluid (change if police/taxi/fleet/off-road/frequent towing); inspect brake linings and parking brake function | 3.0L Hurricane Standard Output |
| Every 30,000 miles | Replace engine air cleaner filter; inspect transfer case fluid | 3.0L Hurricane Standard Output |
| Every 60,000 miles | Replace spark plugs - 3.0L (60,000 / 120,000 mi; mileage-based only) | 3.0L Hurricane Standard Output |
| 100,000 miles | Replace PCV valve | 3.0L Hurricane Standard Output |
| 10 years or 150,000 miles | Flush and replace engine coolant at 10 years or 150,000 miles, whichever comes first. | 3.0L Hurricane Standard Output |
| 150,000 miles / 15 years | Replace accessory drive belt; inspect tensioner and pulley, replace if necessary; change transfer-case fluid. | All covered engines / versions |
Time-Based and Engine-Specific Service
Use the time limit as well as the mileage shown in the applicable row. Spark-plug footnotes are mileage-based only. Coolant service uses the written ten-year/150,000-mile limit unless a separate engine row specifies otherwise.
- Brake-fluid timing must follow the plan and fluid specification for your vehicle
- Never extend oil service to the next air-filter or spark-plug milestone
- Inspections mean check condition and replace only where the plan requires or condition warrants
- Keep dated service records with the mileage and engine hours, where tracked
Engine-Specific Maintenance Details
Use the oil specification and fill that match the installed engine. The table covers 3.0L Hurricane Standard Output. Quantities include the oil filter, and a final level check must follow the manual’s filling procedure. Do not use horsepower, trim name or a similar model as a substitute for identifying the engine. Replacement filters, spark plugs and other part numbers should be confirmed by VIN. Fluid requirements differ by transmission, axle and transfer-case application; confirm the correct specification before adding or replacing a fluid.
| Engine / Version | Required Engine Oil | Oil Fill With Filter |
|---|---|---|
| 3.0L Hurricane Standard Output | SAE 0W-20 full synthetic, MS-6395 | 7.5 qt |
Luxury Features, Air Suspension & Towing Maintenance
The manual’s 3.0L Standard Output plan uses 12,000-mile cabin filters, 30,000-mile engine air filters and 60,000/120,000-mile spark plugs. At oil service, inspect the usual engine, brake and chassis items and clean/lubricate equipped power-side-step linkages. At 20,000-mile/two-year checks, inspect axle fluid and change it for police, taxi, fleet, off-road or frequent towing use. Inspect transfer-case fluid every 30,000 miles/three years; the listed change is 150,000 miles/15 years. Keep the vehicle’s messages and condition checks in the service plan, even when a major mileage item is not yet due. If you notice a new leak, vibration, warning or braking change, arrange an inspection instead of waiting for the next scheduled visit.
- Identify the installed engine and drivetrain before selecting fluids.
- Ask for a condition check after off-road travel, water exposure or a suspected leak.
- Use the correct tire-rotation pattern for the installed wheel and tire sizes.
- Confirm replacement filters and spark-plug part numbers by VIN.
Severe & Special Operating Conditions
At 20,000-mile/two-year checks, inspect axle fluid and change it for police, taxi, fleet, off-road or frequent towing use. Inspect transfer-case fluid every 30,000 miles/three years; the listed change is 150,000 miles/15 years. More frequent attention can be needed in demanding conditions. A condition-based oil message and a specific severe-use fluid interval serve different purposes: follow each item that applies. Discuss the operating conditions below with your advisor; do not assume every shortened interval applies to every engine or drivetrain.
- Frequent towing or heavy loads
- Repeated short trips and extended idling
- Dust, gravel roads or off-road use
- Extreme heat or cold
- Commercial, police, taxi or fleet service where named in the plan


Service for 2027 Jeep Grand Wagoneer Owners Across Western NC
Jeep Grand Wagoneer owners around Brevard, Hendersonville, Asheville, Waynesville and Pisgah Forest drive on a mix of town streets, highways and mountain roads. Bring your mileage, service dates and any engine-hour information when booking. Tell the team about towing, payloads, idling, trail use or frequent short trips. Mahon CDJR can check which inspections and replacements are due, confirm parts for the installed engine and plan work around the way you use the vehicle.
Monthly & Semi-Annual Owner Checks
Between scheduled visits, follow the owner checks in your vehicle’s manual. Watch for changes in tire pressure and wear, warning messages, visible leaks, braking feel and unusual noises. Check accessible fluid reservoirs using the proper procedure and temperature conditions; do not open a hot cooling system. A warning, leak or suspected malfunction calls for attention before the next mileage milestone. The checks below are practical reminders to discuss with your service advisor.
- Check tire pressure and tread using your manual’s procedure.
- Check warning lights and exterior lights.
- Watch for leaks and changes in braking, steering or noise.
- Check accessible fluid reservoirs only as directed in the manual.
- Bring service dates, mileage and any engine-hour records to your visit.
Schedule Your 2027 Jeep Grand Wagoneer Maintenance at Mahon CDJR
Schedule your 2027 Jeep Grand Wagoneer maintenance at Mahon CDJR in Brevard, NC. Our team can review the owner’s manual plan, check your records and confirm the correct parts and fluids for your vehicle. Bring any warning messages and describe how you use the vehicle so the visit includes the checks that apply. Book online or call (828) 492-2121.
Created November 3, 2026 by MM Dealer Advocates