Ram Commercial & Work Trucks | Mahon CDJR Brevard NC

Ram Commercial & Work Trucks in Brevard, NC

New and used Ram work trucks and vans, upfitting, and a service department that keeps them on the job. Sales and service for Western North Carolina businesses at Mahon CDJR.

Proudly serving Brevard, Asheville, Hendersonville, Fletcher & Cherokee NC

Work Trucks and Vans for Western North Carolina Businesses

Mahon CDJR sells and services the Ram trucks and vans local businesses depend on, from Ram 2500 and 3500 Heavy Duty pickups to ProMaster cargo vans. Whether you run one truck or a small fleet, you can shop new and used inventory, have a truck upfitted for your trade, and bring it back to the same place for maintenance and diesel repair.

We work with contractors and tradespeople from Brevard, Asheville, Hendersonville and Fletcher, and across Transylvania, Henderson, Buncombe, Haywood and Macon counties.

Shop Ram Work Trucks and Commercial Vans

Choose a model to see what's in stock, or compare its trims and features. If the truck or van you need isn't on the lot, call (828) 845-4437 and we'll help you find it.

Ram 2500

Heavy-Duty Pickup

Ram 2500 work truck at Mahon CDJR in Brevard, NC

The Ram 2500 tows equipment trailers and carries a full bed of materials, starting with the work-ready Tradesman.

  • 6.4L HEMI V8 or available 6.7L Cummins Turbo Diesel
  • Regular Cab or Crew Cab
  • 4x2 or 4x4
  • Tradesman work trim through Limited

Ram 3500

Single or Dual Rear Wheel

Ram 3500 work truck at Mahon CDJR in Brevard, NC

The Ram 3500 adds payload and towing over the 2500 and offers dual rear wheels for heavy trailers and loaded beds.

  • 6.4L HEMI V8 or available 6.7L Cummins Turbo Diesel
  • Single or dual rear wheels
  • Regular Cab or Crew Cab
  • 4x2 or 4x4

Ram Chassis Cab

3500, 4500 and 5500

Ram Chassis Cab work truck at Mahon CDJR in Brevard, NC

Ram Chassis Cab trucks are built to carry service bodies, flatbeds and dump bodies, with the hardware upfitters need already in place.

  • 6.4L HEMI V8 or available 6.7L Cummins Turbo Diesel
  • Power take-off (PTO) capability
  • Upfitter interface module standard
  • Regular Cab or Crew Cab

Ram 1500

The Everyday Work Truck

Ram 1500 work truck at Mahon CDJR in Brevard, NC

The Ram 1500 Tradesman is a full-size pickup that works as a crew truck, a tow vehicle and a daily driver.

  • Tradesman work trim
  • Quad Cab or Crew Cab
  • Available onboard power with 120V bed outlets
  • 4x2 or 4x4

Ram ProMaster

Cargo Vans and Cutaways

Ram ProMaster work van at Mahon CDJR in Brevard, NC

The ProMaster keeps tools and materials locked up and out of the weather. Front-wheel drive gives it a low load floor that makes loading easier.

  • Front-wheel drive with a low load floor
  • 1500, 2500 and 3500 models
  • Low roof or high roof
  • Cargo Van, Window Van and Cutaway

Ram ProMaster EV

All-Electric Van

Ram ProMaster EV work van at Mahon CDJR in Brevard, NC

The ProMaster EV is the electric version of the ProMaster, a fit for local routes that return to base each day.

  • Electric front-wheel drive
  • DC fast charging
  • Same cargo layout as the gas ProMaster
  • No oil changes or fuel stops

The Right Ram for Your Trade

The best work truck depends on what you carry, what you tow and where you park it. Here is how local trades typically set up their Ram trucks and vans.

Painters

A ProMaster cargo van keeps paint, sprayers and drop cloths locked up and dry, and a ladder rack carries extension ladders on the roof. High-roof models give you room to stand and organize inside. Crews that tow a trailer or carry scaffolding often choose a Ram 1500 or Ram 2500.

Good fits: ProMaster, Ram 1500, Ram 2500

Construction Contractors

Framing, concrete and site work call for a truck that can pull an equipment trailer and carry a full load. Ram 2500 and 3500 pickups handle the towing, and Ram Chassis Cab models take dump bodies and flatbeds. A Ram 1500 with available onboard power can run tools from the bed where there's no power on site.

Good fits: Ram 2500, Ram 3500, Chassis Cab, Ram 1500

Plumbers

Plumbing work means carrying a lot of small parts and long pipe. A ProMaster cargo van with shelving, bins and a pipe rack keeps fittings sorted and stock secure. For heavier jobs like water heaters and excavation, a Ram 2500 or Chassis Cab with a service body puts every tool in an outside compartment.

Good fits: ProMaster, Ram 2500, Chassis Cab

Heating & Air Conditioning Professionals

HVAC technicians need room for equipment, sheet metal and parts, plus ladders for rooftop and attic work. A ProMaster cargo van holds it all behind locked doors, and a service body on a Ram Heavy Duty truck keeps tools within reach. For service calls and estimates, a Ram 1500 Tradesman covers the miles comfortably.

Good fits: ProMaster, Ram Heavy Duty, Ram 1500

Don't see your trade? Landscapers, electricians, roofers and delivery businesses use these same trucks and vans. Tell us what you carry and tow, and we'll help you find the right one.

Upfitting and Accessories

Upfitting is available for the trucks and vans we sell, so your vehicle can be set up for the way you work. Tell us about your trade, your tools and what you tow, and we'll help you plan the right setup.

  • Ladder racks and roof racks
  • Van shelving, parts bins and partitions
  • Service bodies and utility beds
  • Flatbeds and dump bodies
  • Toolboxes and bed storage
  • Trailer hitches, brake controllers and towing equipment
  • Bed liners, bed covers and running boards

Call (828) 845-4437 to talk through upfit options for your truck or van.

Commercial Truck Service and Diesel Repair

A work truck that's down costs you money. Our certified Mopar technicians service the trucks and vans we sell, gas and diesel, using genuine Mopar parts.

We work on any Chrysler, Dodge, Jeep or Ram diesel engine, including the 6.7L Cummins Turbo Diesel in Ram 2500, 3500 and Chassis Cab trucks and the 3.0L EcoDiesel in earlier Ram 1500 and Jeep models. See our Ram diesel repair page for the full list of diesel services, then book your visit with our online service scheduler.

  • Diesel oil changes and fuel filter service
  • Diesel fuel system, turbocharger and emissions system (DEF and DPF) repair
  • Brakes, tires and alignments for heavy-duty trucks
  • Transmission, cooling system and driveline service
  • Factory scheduled maintenance for trucks and vans
  • Recall and warranty repairs

Serving Businesses Across Western North Carolina

Mahon CDJR is located at 1161 Asheville Hwy in Brevard. We sell and service work trucks for businesses in Brevard, Asheville, Hendersonville, Fletcher, Mills River, Waynesville, Canton, Rosman, Franklin, Highlands and Cherokee. If you're comparing work trucks or need a shop for your diesel, call (828) 845-4437 for sales or (828) 492-2121 for service.

Ram Work Truck FAQs

What Ram work trucks does Mahon CDJR sell?

We sell new and used Ram work trucks and vans, including the Ram 1500, Ram 2500, Ram 3500, Ram Chassis Cab, ProMaster and ProMaster EV. Inventory changes often, so call (828) 845-4437 if you don't see the truck you need.

Can you upfit a truck or van for my trade?

Yes. Upfitting is available for the trucks and vans we sell, including ladder racks, van shelving, service bodies, flatbeds and towing equipment. Call (828) 845-4437 to plan a setup for your trade.

Do you repair Ram Cummins diesel trucks?

Yes. Our certified Mopar technicians work on any Chrysler, Dodge, Jeep or Ram diesel engine, including the 6.7L Cummins Turbo Diesel and the 3.0L EcoDiesel. See our Ram diesel repair page for details.

Do you sell used work trucks?

Yes. We carry used trucks from Ram and other makes. Used inventory changes often, so check back or call (828) 845-4437 to ask about a specific truck.

How do I schedule service for a work truck?

Use our online service scheduler or call (828) 492-2121. Let us know if the truck is a diesel or has an upfit so we can plan the visit.

Mahon CDJR — proudly serving Brevard, Asheville, Hendersonville, Fletcher & Cherokee NC.


Created November 16, 2026 by MM Dealer Advocates